10 Update the OS Your Apple Watch to the Latest Build

softwarebuck April 25, 2021 0 Comments

Apple Watch doesn’t turn on when wrist is raised

One of our readers, Sarah, kindly contacted us to explain this issue and howto fix it, and there’s also a discussion of this one in the Apple supportforum. The issue is that the Apple Watch screen is not coming to life as itusually does when people raise their wrist or do a flicking motion with it.

Notifications don’t appear on Apple Watch

You’re used to seeing and checking notifications on your iPhone, and they’llcontinue to appear there when your iPhone is unlocked, but when it’s locked orasleep you should get those notifications on your Apple Watch. If you’rewondering why you aren’t getting notifications on your Apple Watch, it’sprobably because your Apple Watch is locked, Do Not Disturb is enabled orWrist Detection is off.

Check the Status of Your Apple Watch through the Control Center

The first thing that you can do is to pull up the watch’s Control Center andsee for sure that it isn’t pairing with your iPhone. You will need to touchand hold the bottom of the watch’s face. The bottom of the Control Center willappear. Swipe up, letting it take over the display.If your Apple Watch is not connected to your iPhone, then you will see one oftwo things. The first is a red X. The second is a red rectangle, representingyour phone, with a slash through it. If you see either of those, then you wereright in suspecting that the watch is not paired with the phone. Meanwhile, ifthe two devices are paired, then you should see a green rectangle representingyour iPhone without a slash through it.If you were right when you suspected that the two devices were not paired,then read on.

Try to Reestablish a Connection Between the Apple Watch and Your iPhone

Whether you once had these two devices paired or whether you’re in the initialsetup phase and you haven’t managed to connect them yet, you should try toreestablish a connection before you try anything else.First, make sure that the Apple Watch and iPhone are sitting right next toeach other. Having the devices too far away makes pairing them impossible.Bring up your Control Center from the bottom of the screen on your iPhone.You’ll need to check to make sure that Airplane Mode is off. It’s the littleairplane icon inside a circle. That circle should be clear, meaning the modeis disabled. You also have to check to see if Bluetooth is on. That’s thecircle with the icon in it that looks a little like a capital letter B.

Restart Your Apple Watch and iPhone Before Pairing Them

At this point, you should restart both your iPhone and your Apple Watch. Thismight allow the devices to sync up if they were unable to do so before.To restart your Apple Watch, you must press and hold the Side button until yousee a Slide to Power Off slider come up on the display. Drag it to the right,turning off the watch. Once it turns off, wait a few seconds. Then, press andhold the Side button one more time until you see the Apple logo, indicatingthat the watch is restarting.As for the iPhone, if you have a generation X or above, then you have to pressand hold your Side button and either one of the Volume buttons. The Slide toPower Off slider will come up. Slide it to the right, turning off the phone.Then, press the Side button to reactivate the device. If the Apple logo comesup, then you have done it correctly.If you have a generation 6, 7, or 8, then press and hold your Side buttonuntil that Slide to Power Off slider appears. Slide it to the right, shuttingoff the phone. After that, press and hold down the Side button until an Applelogo comes up, and wait for the phone to restart.Get Cash For Your Used Apple Watch We buy used and broken Apple Watches fortop dollar! Get free shipping, a 14-day price lock, and our highest priceguarantee. GET A FREE QUOTEIf you have the iPhone 5 or an earlier model than that, you need to push andhold down the Top button until you get the Slide to Power Off slider. Drag theslider and wait for the phone to power off. Then, press and hold down your Topbutton until the Apple logo appears.When both the iPhone and the Apple Watch are reactivated, see if theyrecognize each other now. If they still won’t pair, then keep reading.

Unpair the Apple Watch and iPhone, then Pair Them Again

At this point, if you’re still having trouble, then intentionally unpairingthe devices and pairing them again is probably the way to go. First, go toSettings on your Apple Watch, then General. Go to Reset, then Erase AllContent and Settings. Tap it.Meanwhile, on your iPhone, go to the Apple Watch app. Hit the tab that says MyWatch. Tap the icon of your watch at the top of the screen. Tap the icon thatlooks like a lower-case letter I in a circle. The option Unpair Apple Watchwill come up on the display. Tap it, then tap it again when it asks you if youwant to confirm.Now, follow these next instructions to connect the two devices again.

Pairing the Apple Watch and iPhone After an Intentional Disconnect

To set up and pair your devices again, the first thing you’ll need to be sureof is that you’re running the latest version of iOS on your iPhone. YouriPhone’s Bluetooth also has to be turned on. You must be connected to a steadyWi-Fi network or cellular service. If any of these isn’t the case, the pairingwill not work correctly.Turn on your Apple Watch by pressing and holding the Side button. Turn youriPhone on as well, and keep the two devices near each other. Wait for amessage that says Use Your iPhone to Set Up this Apple Watch to come up on theiPhone’s screen. Tap Continue. If this message doesn’t come up, then open theApple Watch app on your phone and tap Start Pairing.There should now be a viewfinder that comes up on the iPhone’s display. Youhave to hold the watch over it, and then a message should come up saying thatthe devices have paired.

6. Unlock Your iPhone and Call Through the Apple Watch.

Another bug that has appeared time and again despite the many iOS updates isthat your watch will fail to make a call when your iPhone’s screen is lockedor off.Listed below are the fast and easy steps to make a call while your is iPhoneunlocked: 1. Unlock your iPhone with your PIN or preferred method. 2. Make a call through your Apple Watch and see if the error persists, consecutively try to make a call through your iPhone as well. 3. If this works then you can try to lock your iPhone and call using your Apple Watch again to see if the error is completely gone.This simple fix seems almost too easy to work but, funnily enough, rudimentarythings like this are often the solution. If the problem still occurs, you cantry doing the next method below.

7. Unlock the Apple Watch Using Your iPhone.

Another quick-fix that is available is to configure your settings to allowyour iPhone to unlock your Apple Watch.Instead of unlocking both gadgets separately, giving your iPhone access tounlock your Apple Watch can work as an initial signal to make sure that bothdevices are communicating correctly. This will in turn, additionally, helpclear and fix random bugs that are interfering with the connection of yourdevices. 1. First, open the Apple Watch app on your iPhone. 2. tap on Passcode. 3. Next, enable the Unlock with iPhone option. 4. Then, restart your iPhone and Apple Watch. 5. Make sure to leave your Apple Watch alone. Don’t unlock it before anything else. When the restart is finished, unlock the Apple Watch with your iPhone and then try to make a call from your Apple Watch.Try to make a call now and see if the problem still occurs. If this doesn’tfix your issue, try the last few methods below.

10. Update the OS Your Apple Watch to the Latest Build.

The watchOS of your Apple Watch is regularly updated to receive the newestfeatures and bug fixes. If your watchOS is outdated, errors like this are onlyone of many to come. So make sure your hardware is always up to date!Updating your watchOS can involve downloading a lot of data. Hence, make sureyour Apple Watch is charged with at least 50 percent battery life as well asconnected to a stable Wi-Fi connection. Depending on the speed of yourinternet, this can take a couple of minutes to possibly an hour.Here’s how you can go about the update process: 1. Go ahead and open the Settings of your Apple Watch. 2. Then, tap on General. 3. Now, press Software Update and if an update is available, just follow the prompts on your screen to start downloading. 4. Your Apple Watch should be done restarting after your watchOS update, try to make a call and see if the issue is resolved. Make sure both your iPhone and Apple Watch are up to date on their operatingsystems. Here’s how you can update your iPhone iOS to make sure both yourdevices are using the latest software.

Method 4: Factory Reset Apple Watch

If users are sure of an existing backup of their iPhone, then the paired watchdata would be automatically backed up on the iCloud. Factory reset literallyrids your device of all data, settings, picture, songs etc., thereby returningit to its initial from-factory mode.This act should eliminate all settings and bugs that might be responsible forthe Apple watch stuck on Apple logo issue. To perform the reset, follow thefollowing procedure. 1. On your Apple watch, go to General > Reset > Erase All Content and Settings. 2. Upon request, input your Apple passcode. 3. Confirm the erase by tapping the Erase All button. 4. Wait for the watch to restart. 5. Re-pair your watch to your iPhone, be careful not to restore from a backup.

Issue: Apple Watch won’t turn on

There have been reports of Apple Watch devices not turning on, and the screennot responding when touched.Potential solutions: * If you’ve enabled Power Reserve, the watch won’t respond to wrist movement or tapping. Try pressing the side buttons to see if the watch will turn on. * It may sound silly, but try charging your Apple Watch. The battery may have simply run out. * Press and hold the Digital Crown and side button for at least 10 seconds to trigger a forced restart. You’ll know you did it right if you the Apple logo appears. * If the watch comes on after the restart, but never fully starts, or if you’re met with a red exclamation mark, reach out to Apple Support, as you may have run into a hardware issue that can’t be fixed on your end.

Leave a Reply

Your email address will not be published. Required fields are marked *