2 Restart Your Apple Watch and iPhone

softwarebuck April 25, 2021 0 Comments



Fix 1. Make sure your Apple Watch works with watchOS


Apple releases major updates to watchOS every year. Since newer updates needmore processing power, sometimes they don’t work with older Apple Watchmodels.Maybe you can’t update your Apple Watch because it isn’t compatible with thelatest update.The original Apple Watch isn’t compatible with watchOS 6 or later.That said, the latest version of watchOS works with all except the originalApple Watch, sometimes called the Apple Watch Series 0. So unless you’re stillrocking that first Apple Watch, you should be fine.Take a look at Apple’s website to find out which Apple Watch you have.

Fix 3. Test the connection from Apple Watch to iPhone


Since your Apple Watch downloads and installs watchOS updates using youriPhone, you need to make sure that both devices are connected to one another.There are a couple of different ways to check this.On your Apple Watch, swipe up to open the Control Center. A green iPhone iconin the top-left means your Apple Watch is connected to its paired iPhone.A green iPhone icon shows the connection.You can also test this connection using the Ping action from the ControlCenter. If your devices are connected to one another, this should cause youriPhone to make a sound.If your iPhone and Apple Watch aren’t connected to one another: * Turn on Wi-Fi and Bluetooth on your iPhone * Turn on Wi-Fi and Bluetooth on your Apple Watch * Disable Airplane mode on your iPhone and Apple Watch

6. Unlock Your iPhone and Call Through the Apple Watch.


Another bug that has appeared time and again despite the many iOS updates isthat your watch will fail to make a call when your iPhone’s screen is lockedor off.Listed below are the fast and easy steps to make a call while your is iPhoneunlocked: 1. Unlock your iPhone with your PIN or preferred method. 2. Make a call through your Apple Watch and see if the error persists, consecutively try to make a call through your iPhone as well. 3. If this works then you can try to lock your iPhone and call using your Apple Watch again to see if the error is completely gone.This simple fix seems almost too easy to work but, funnily enough, rudimentarythings like this are often the solution. If the problem still occurs, you cantry doing the next method below.

How to Pair Your Apple Watch to an iPhone


To pair your Apple Watch and iPhone, first make sure both devices are chargedand on. Place them near to each other. Wait until you see a dialog box appearon the iPhone that says Use your iPhone to set up this Apple Watch. And thenpress Continue to begin the process.A screen will appear on the iPhone and an animation will be shown on the AppleWatch. Align the viewfinder of the iPhone screen with the Watch on your wrist.You can also pair the devices manually by selecting Pair Apple Watch Manually.Once the Apple Watch is paired to an iPhone, you’ll continue the process andcustomize settings, sign in with an Apple ID, create a passcode, select apps,and more.

2. Restart Your Apple Watch and iPhone


The next step you can take is to restart both the Apple Watch and the iPhone.On the Apple Watch, press the Digital Crown and Side button simultaneously for10 seconds until you see the Apple logo. Wait until you see the Watch face.Then it’s time to move on to your iPhone. On an iPhone X or later, press andhold the Side button and either volume control buttons until you see the PowerOff slider. Select that by sliding it to the right. Restart the iPhone bypressing the Side button until the Apple logo appears.With an iPhone 8 or earlier, press and hold either the top or side button(depending on your model) until the Power Off slider appears. Slide it rightto completely turn off the handset. Then press and hold the same button untilthe Apple logo appears to turn your iPhone on.

Try to Reestablish a Connection Between the Apple Watch and Your iPhone


Whether you once had these two devices paired or whether you’re in the initialsetup phase and you haven’t managed to connect them yet, you should try toreestablish a connection before you try anything else.First, make sure that the Apple Watch and iPhone are sitting right next toeach other. Having the devices too far away makes pairing them impossible.Bring up your Control Center from the bottom of the screen on your iPhone.You’ll need to check to make sure that Airplane Mode is off. It’s the littleairplane icon inside a circle. That circle should be clear, meaning the modeis disabled. You also have to check to see if Bluetooth is on. That’s thecircle with the icon in it that looks a little like a capital letter B.

Restart Your Apple Watch and iPhone Before Pairing Them


At this point, you should restart both your iPhone and your Apple Watch. Thismight allow the devices to sync up if they were unable to do so before.To restart your Apple Watch, you must press and hold the Side button until yousee a Slide to Power Off slider come up on the display. Drag it to the right,turning off the watch. Once it turns off, wait a few seconds. Then, press andhold the Side button one more time until you see the Apple logo, indicatingthat the watch is restarting.As for the iPhone, if you have a generation X or above, then you have to pressand hold your Side button and either one of the Volume buttons. The Slide toPower Off slider will come up. Slide it to the right, turning off the phone.Then, press the Side button to reactivate the device. If the Apple logo comesup, then you have done it correctly.If you have a generation 6, 7, or 8, then press and hold your Side buttonuntil that Slide to Power Off slider appears. Slide it to the right, shuttingoff the phone. After that, press and hold down the Side button until an Applelogo comes up, and wait for the phone to restart.Get Cash For Your Used Apple Watch We buy used and broken Apple Watches fortop dollar! Get free shipping, a 14-day price lock, and our highest priceguarantee. GET A FREE QUOTEIf you have the iPhone 5 or an earlier model than that, you need to push andhold down the Top button until you get the Slide to Power Off slider. Drag theslider and wait for the phone to power off. Then, press and hold down your Topbutton until the Apple logo appears.When both the iPhone and the Apple Watch are reactivated, see if theyrecognize each other now. If they still won’t pair, then keep reading.

Pairing the Apple Watch and iPhone After an Intentional Disconnect


To set up and pair your devices again, the first thing you’ll need to be sureof is that you’re running the latest version of iOS on your iPhone. YouriPhone’s Bluetooth also has to be turned on. You must be connected to a steadyWi-Fi network or cellular service. If any of these isn’t the case, the pairingwill not work correctly.Turn on your Apple Watch by pressing and holding the Side button. Turn youriPhone on as well, and keep the two devices near each other. Wait for amessage that says Use Your iPhone to Set Up this Apple Watch to come up on theiPhone’s screen. Tap Continue. If this message doesn’t come up, then open theApple Watch app on your phone and tap Start Pairing.There should now be a viewfinder that comes up on the iPhone’s display. Youhave to hold the watch over it, and then a message should come up saying thatthe devices have paired.

How to pair a new Apple Watch with the iPhone 12


If you have purchased the new Apple Watch SE or Series 6 and the iPhone 12,it’s time to pair them. Before you pair your Apple Watch with the iPhone 12,make sure the devices have enough battery. Additionally, be sure both thedevices are running the latest iOS and watchOS version. For your information.that would be iOS 14 and watchOS 7.

How to pair an existing Apple Watch with the iPhone 12


If you have an existing Apple Watch (in my case I own the Apple Watch Series4) but want to pair it with the new iPhone 12, the process is again quick andsimple. Before you start pairing them, be sure both the Apple Watch and iPhone12 have been updated to their latest software versions. Now, follow thesesteps to pair your Apple Watch with the new iPhone 12.*Back up your old iPhone to the cloud. This way all the Apple Watch data will be stored on the iCloud.*Unpair your Apple Watch on the old iPhone. Go to the Watch app on the iPhone, and tap Unpair Apple Watch.’*If you are setting up the iPhone for the first time, an Apps & Data screen. Choose to restore from an iCloud backup, then select the latest backup.*Finish setting up the iPhone. When asked, choose to use your Apple Watch with your new iPhone.*You will be prompted to pair your Apple Watch prompts to the new iPhone. Tap OK on your Apple Watch, then enter its passcode.How to Fix Apple Watch Activity Not Showing Up Correctly on Activity AppI love my Apple Watch for tracking my fitness and daily activity. Except whenI am left wondering how to fix apple watch activity not showing up the way itshould when I open the Activity app on my iPhone.Photo Credit: Apple.comWhen the Apple Watch activity tracker is working correctly it willautomatically track your daily movements.Similar to other fitness tracking apps, except this is native to the iPhoneand created specifically for the Apple Watch.With the help of the activity tracker and the Activity application you can dosome really neat things like: * Stay on top of your daily / weekly / monthly fitness progress * Set up notifications to keep you on your toes (literally) * Create and meet specific health goals * Share your activity level with friends and family * Challenge others in weekly fitness challenges and see who gets the most pointsThis is all great when it is working exactly as expected!Every once in a while though, there will be a delay in data between theActivity app on my Apple Watch and iPhone.Other times, my activity may not show up in the app at all!In other words, each app is giving a different progress and update. Sometimesone device provides the most accurate steps and movements while the otherstill stuck on yesterday’s report.Since you are here, I know you are also having some trouble getting your AppleWatch to sync properly with the Activity App on your phone.This guide will walk you through some of the ways you can get your activityshowing up correctly again.

2 Ways To Manually Fix Apple Watch Activity To Sync Your Activity To iPhone




Another Method For Syncing Activity App and Apple Watch


If it doesn’t work to turn off both devices completely, you can try thismethod of getting your data to get on the same page: 1. Go on your Watch app, go to Activity > Progress Update > switch to None 2. Restart your iPhone 3. Turn off Wi-Fi and turn it back on

Leave a Reply

Your email address will not be published. Required fields are marked *